Measure before mounting
Check that your device is approximately 14 to 24 cm wide and that the chosen furniture edge is flat, sturdy, and no more than approximately 4 cm thick.

Why holding gets tiring
The problem is not only the device's weight. It is having to keep that weight supported in the same position while you read, watch, or talk. EasyView replaces that sustained grip with a clamp-mounted articulated arm.
The base tightens onto a sturdy, flat furniture edge so the table or frame carries the device load.
Two articulated sections let the screen move closer, higher, lower, or farther away without moving the furniture.
The expandable cradle supports many phones and tablets approximately 14 to 24 cm wide.
Adjust the screen for portrait or landscape use, then tighten the joints for your preferred position.

A routine that stays simple
Clamp EasyView to a compatible bedside table, desk, shelf, or sturdy bedframe edge up to approximately 4 cm thick. Insert your device, adjust the arm, and confirm the clamp and joints are secure.
Use it while reclining in bed, sitting on the sofa, joining a video call, reading, following a recipe, or keeping a reference screen beside your desk. The mount can remain nearby between uses, so you are not rebuilding a pillow stack each time.
A family member or caregiver can help with the first setup and joint tension. After that, the arm can be repositioned as your seat, screen, or activity changes.
What to expect
EasyView is designed to make screen positioning more convenient, but the best experience depends on a compatible device, a stable mounting surface, and properly tightened joints.
Check that your device is approximately 14 to 24 cm wide and that the chosen furniture edge is flat, sturdy, and no more than approximately 4 cm thick.
Try a few arm positions, keep the reach reasonably compact, and tighten each joint once the screen sits where you want it.
Confirm the clamp, holder, and joints remain secure. Slight movement when tapping an extended screen can be normal.
Why choose EasyView?
A simple three-column comparison keeps the differences clear on every screen. Performance still depends on the device, mounting surface, and setup.
| Feature | Vaylen EasyView | Holding or props |
|---|---|---|
| Device support | ✓Clamp + arm | ×Hand or loose objects |
| Hands free after setup | ✓Yes | ×Limited or no |
| Height and reach | ✓Multi-joint control | ~Depends on arm or prop |
| Portrait or landscape | ✓Rotating holder | ~Manual or limited |
| Drilling required | ✓No | ✓No |
| Screen stability | ~May move slightly | ~Hand or props may shift |
Questions before ordering
The holder is designed for many devices approximately 14 to 24 cm wide. Measure your phone or tablet with its case attached before ordering.
Use a sturdy, stable, flat furniture edge up to approximately 4 cm thick. Suitable locations may include compatible bedside tables, desks, shelves, and bedframes.
No. The base uses a tightening clamp, so installation does not require drilling or permanent hardware.
Any extended arm can move slightly when the screen is tapped. Keep the arm reasonably compact, tighten each joint securely, and use light touches for greater stability.
For safer use, position the screen comfortably in front of you rather than directly above your face. Always confirm the clamp, joints, and device holder are secure before use.
Yes. A family member or caregiver can secure the clamp, adjust the joint tension, and place the screen in a comfortable starting position.
It can remain mounted on a suitable surface, but check the clamp and joints before each session and reposition the arm carefully when needed.